Ai uitat parola?


  1. Home
  2. Probleme Tehnice
  3. Motoare Diesel
  • rebotea

  • Mesaje scrise: 28
  • Locatie: Statele Unite
  • Masina: Vectra OPC 2003
  • Status: Offline
  • Cont inregistrat: 14 Apr 2013

  • Mesaj Privat
hi i have a problem in the Swirl Level Control Solenoid Valve Pulse where is it located? and what can i do
Thank´s

Motor type: Y20DTH
Total number of fault codes: 2

P0195 - <Unknown DTC>
(07) - Present

P0660 - Swirl Level Control Solenoid Valve Circuit Open
(04) - Present
  • iulian1971

  • Mesaje scrise: 7,081
  • Locatie: Ilfov
  • Masina: Astra 2008 Z19DTH
  • Status: Offline
  • Cont inregistrat: 21 Dec 2006

  • Mesaj Privat
Welcome.
First code seems to be caused by the Engine oil temperature sensor, check the switch.
For the second code check the F 15 fuse from the engine bay. If its ok, look at the swirl actuator (back of the radiator), see if it works.
  • rebotea

  • Mesaje scrise: 28
  • Locatie: Statele Unite
  • Masina: Vectra OPC 2003
  • Status: Offline
  • Cont inregistrat: 14 Apr 2013

  • Mesaj Privat
Thank´s

it was the conector since i have only one Swirl Level Control Solenoid Valve .

is this a read only valve or a control valve.

can someone explain becau-se now it is in 4% and i dont see it moving.

Thank´s again


  • iulian1971

  • Mesaje scrise: 7,081
  • Locatie: Ilfov
  • Masina: Astra 2008 Z19DTH
  • Status: Offline
  • Cont inregistrat: 21 Dec 2006

  • Mesaj Privat
I think its working ok:
"Tester Display Swirl Level Control Solenoid Valve Pulse Ratio
- Engine running at idle speed, operating temperature
- All consumers turned off
- Accelerator pedal not actuated
Note:
This data list parameter is in the data list 3 .
3.5 ... 5.5 %
..........
Accelerator pedal actuated several times
Value changing briefly "
Skip ads

  1. Home
  2. Probleme Tehnice
  3. Motoare Diesel

Intra in ClubOpel!

check Cea mai mare comunitate Opel
check Intalniri locale
check Skip Ads
check Vinzi/Cumperi
check Gratuit pe viata




CO+FB CO+FB CO+YT CO+IG CO+TWTR